User's Manual

Guangdong Strumgle Electrical Appliances Co., Ltd.
User Manual for George II
- 5 -
6. In any condition, long press the "Bluetooth" button for 2 seconds, the Bluetooth communication is
disconnected, and the voice broadcast "Bluetooth disconnected", and the Bluetooth light ring keeps
flashing
7. Touch the "Bluetooth" button for 2 seconds, the Bluetooth function will be turned off, the voice broadcast
"bluetouch off", and the "Bluetooth" light ring will be turned off.
8. When the machine is not turned off, touch the "Bluetooth" button once to turn on the Bluetooth function
again
* Note:
a. Please refer to the user manual of your device to turn on the Bluetooth of your device (mobile phone,
tablet, computer or other). The operation steps of different devices are different
b. In order to ensure a smooth Bluetooth link, please keep the distance between the device and the
aromatherapy machine within 10 meters, and at the same time, there should be no obstruction between
the two devices
c. Bluetooth function will consume battery power, please turn off Bluetooth function when not in use
 LIGHTING:
1. The first time you touch the "light" button, the light ring lights up, and the atmosphere light turns on the
automatic cycle.
2. Touch the "light" button from the second time to the eighth time to select the color you like. The color
selection order is: Purple - yellow - red - Blue - Green - cyan – white.
3. In any condition, press and hold for 3 seconds to turn off the machine. After the machine is turned off,
the light will go out and the ambient light will go out at the same time.
* The above functions can also be controlled through the George APP of the product. Please
refer to the app operating instructions for specific operation.
CHARGING：
1. Charging Mode：
The power supply of this device is built-in lithium battery with a capacity of 4000mAh, which can be charged
directly. It only needs to connect type-C and USB power interface to charge, and the power output is DC 5V-2A
2. First Charging：
2.1 Please fully charge the lithium battery before power this device on for the first time. When the device is
charged in the off state, the decorative light will be red and flashes; When the decorative light is always blue, it
means that the charging is completed.