User's Manual

Guangdong Strumgle Electrical Appliances Co., Ltd.
User Manual for George II
- 4 -
 ON/OFF：
1. POWER ON：Press this button for 1sec. to power on the machine and the back-lit of blue will be on, and there is
a voice tip of “Power On”.
2.POWER OFF：Keep pressing this button for 3secs., all lamp rings including LIGHTING, BLUETOOTH, FAN will be
flashing for 3secs, and there is a voice tip of “Power Off”.
* Note: During the 3secs. of powering off, it will be determined failure of power off if voice tip and lamps
flashing are not finished.
 FRAGRANCE:
1. After Power On, the fragrance function defaults to large gear, and the light ring of button turns BLUE.
Work in the large gear for 5 minutes and then stop for 1 minute
2. Touch this button again for small gear, and the color of light ring is RED
3. Touch the fan again to stop working and the light ring goes out
4. When the machine is not turned off, the operation of the button will cycle according to the above rules
 BLUETOOTH:
1. After Power on, the Bluetooth button light starts to flash, and the voice plays "bluetouch on".
2. After Bluetooth connection is successful, voice plays "Bluetooth connected", and Bluetooth button light
ring is always on.
3. If the user does not pair Bluetooth within 1 minute, the Bluetooth light will turn off automatically after 1
minute.
4. As long as the connection is successful, the light on the Bluetooth button will be on for a long time.
5. After Bluetooth is successfully connected, if you need to pause, just touch the "Bluetooth" button, and
the "Bluetooth" light ring starts to flash; Touch the "Bluetooth" button again, the Bluetooth
communication is normal and the "Bluetooth" light ring remains on for a long time.