Instruction Manual

4.iOS: Make sure Bluetooth is on and Bluetooth Authorization is allowed.
Android: Make sure Bluetooth is on and GPS and Location is allowed.
5.In the back of scale, pull out the insulation sheet, then place the scale on a hard, flat surface,
step onto the scale with single foot to activate the scale. Wait until the display shows “0.0lb”.
6.Pair the scale through Bluetooth. Make sure the scale is on when pairing. Leaving the APP
on its main screen, it will automatically connect to the scale. Or you could also click “Account“
----> “My Devices”---> “+” ----> “Bluetooth” find the scale Bluetooth ID: Runstar-R4.
7.The app will show your data within a few seconds.
5