Electronic Body Fat Scale Instruction Manual
Scan the corresponding QR Code to download APP Thanks for choosing smart body scale. This fully body composition scale can help you conveniently measure body weight, hear rate, body balance, BMI, body fat rate, Fat-free body weight, subcutaneous fat, visceral fat,body water, skeletal muscle rate, muscle mass, bone mass, protein, BMR, body age and etc; IMPORTANT: Please read these instructions in this manual carefully before using the device.
WARNING DO NOT use with medical implants such as pacemakers. DO NOT stand on the edge of the scale or jump on it; DO NOT overload the scale(Max.180kg) DO NOT drop scale or droop an objects on it as this may damage the sensors. DO NOT immerse the scale in water or use chemical cleaning agents. Clean the scale with slightly damp cloth. Not recommended for pregnant women. Not recommended for infants, toddlers, and children under 10 years of age.
Product size: 300x300x20.5mm VA display:62x109mm Weight unit:Kg/Lb/St Weight limit: 6kg-180kg Power Supply: Rechargeable lithium cell 600mAh Account number: No limitation (each account can add 24 persons) Baby mode: Allow you to scale the weight of baby Height record: Allow you to record the height info under 16 years old Operating temperature: 10-400C Operation humidity: 20%-90% Support Devices: iOS 8.0 or higher Android 6.0 or higher Install Fitdays App 1.
1. Place the scale on a hard, flat ground. √ X 2. Turn on Bluetooth on your smart phone or tablet. 3. Register your own ID by email or social media account. 4. Add personal data and click Confirm; Note: Enter the wrong info like gender, age, height, etc. may result in measurement inaccurate.
5. Pair the scale via Bluetooth. Click Mine ----> Device---> + to find and pair the scale ID. Note: When successfully connection, a Bluetooth icon will show on scale and the word Connected will show on the circle of homepage. 6. Tap your foot on the scale to activate the display. Wait until the display shows “0.0”kg. 7. Stay Fitdays at the homepage and step on the scale with BARE feet to star measuring.
10. Stay on the scale until the circle shows ‘Finished’, all data sync on scale and phone. 11. Click More data to find details for Body Weight, BMI, BMR, Muscle, Bone Mass etc. And check data difference on Chart by week, moth and year in vertical or horizon version with icon up right. 12. Add or switch user: click photo profile on homepage, or Mine--> Add user. The Smart Scale can recognize the user by weight difference and remind to change the correct one.
13. Baby weight checking: click + --> Baby Mode. Adult steps on scale to weight first; after scale gets the weight, please step off the scale and hold the baby to weigh again; Fitdays will automatically calculate the baby’s weight. TROUBLE SHOOTING GUIDE 1. Device failure ⚫ Features: the scale failed to pressure switch on when full of power or display stop running when it’s light. ⚫ Press the button on the edge of scale to reset the scale. 2.
⚫ Make sure the scale and the Bluetooth on your phone are on ⚫ Check the OS version of your smart phone, it must be iOS 8.0 or higher/Android 6.0 higher. ⚫ For successfully connection, there has a Bluetooth icon on the display and the word Connected will show on the circle of the homepage on phone ⚫ If fail to connect via Bluetooth, please click Mine--->Device to find the scale ID. 3. No body fat data after weighting ⚫ User must step onto the scale with bare feet.
8. How to exchange the unit ⚫ Click Mine--->Setting--->Switch unit to change the unit on your phone. Battery Advice ❖ Place the scale far away from the children in case of falling down or crashing. ❖ Keep the USB cable out of reach of children to prevent from wrapping to death. ❖ Do not expose the scale to heat or fire, which will easily cause explosion. ❖ Do not use the scale when it is on charge. ❖ Waste electrical products should not be disposed of with household waste.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
