User's Manual
Instructions
2
2
Cleaning mode Spot cleaning
Partial cleaning
After the robot is powered on, it will scan and generate
the map and divide it into areas intelligently. Then sweep
the areas one by one along the wall orderly, efficiently and
thoroughly and plan the cleaning route in a bow/S shape.
The robot will return to the charging base automatically after
cleaning.
:KHQDORFDODUHDQHHGVDGHHSVZHHSWKHXVHUVSHFL¿HVD
point on the map on the APP, the machine will automatically
drive to the vicinity of the point, take the point as the center,
and clean within 1.5m x 1.5m.
When the robot cannot be controlled by the mobile APP,
please remove the robot to the place you want to clean. Long
press the button for 3 seconds, and the robot will clean
twice within the scope of 2mx2m centering on itself.
Note:
Do not move the robot casually and frequently when it is
cleaning. After moving, please put the robot near the original
position. When it starts again, it will try to reposition itself. After
successful positioning, it would follow the planned path and
continue to work. If the positioning fails, the robot would abort
previous mission, make a map and do the cleaning again.
(YHQLWPD\QRW¿QGWKHFKDUJLQJEDVH
Area being cleaned
Area to be cleaned
12
14