User's Manual
Product Introduction
Installation
5.Starting up and charging
。
6.Connect mobile APP(this step can be
skipped)
7.Start cleaning
8.Installation of mopping module
Long press to switch on the robot.Charge the robot on charging
base when the power indictor light is normally on.
Note:If the machine cannot be started due to low battery, please
charge the host on the charging base and the machine will be
started automatically. The machine can work normally only when
WKHEDWWHU\OHYHOLV
After the robot is powered on, short press key on the robot
or use mobile APP to start cleaning.(press any button to pause
during using).
Note:
• The sweeping robot cannot be used to remove liquids.
•
If the battery level is less than 20, the machine cannot work.
Please charge it.
•
The machine will return to the charging base automatically if the
EDWWHU\OHYHOLVOHVVWKDQLQXVHDQGZLOOEHSRZHUHGRႇDQG
VWDUWFOHDQLQJDXWRPDWLFDOO\DIWHUWKHEDWWHU\OHYHOUHDFKHV
•
Please clear various wires (including power line of charging base)
on the ground before use so as to avoid outage and damage of
objects or wires when wires are dragged by the host.
Please refer to WiFi connection guideline, then connect mobile APP.
Ś
,QVWDOODWLRQRIPRSSLQJFORWKSDVWHWKHPRSSLQJFORWKÀDWO\WR
the bottom of water tank.
Note: please clean the mopping cloth after using to keep it in
good cleaning condition.
(Hanging permeate type water tank)
(2 in 1 electric-controlled water tank )
(Electric-controlled water tank)
8
10