User's Manual

Product Introduction

Installation

1.Connect power line and feed the excess wire into the slot

。

3.Please do not move the charging base arbitrarily and keep

it out of direct sunlight

。

Note

：

•If the charging base is relocated, the host may fail in positioning

and lose the map. When restarted, the host will rebuild and

memorize the map and the rebuilt map may lose cleaning

information of forbidden areas and other areas

。

•Direct sunlight will interfere with recharging signal and consequently

the host may be unable to return to the charging base

。

2.Place charging base against the wall and connect the power

。

Note:

•Ensure a space of above 0.5m on both sides of the charging

base and a space of above 1.5m in the front

。

•If the power line is vertical to the ground, it may be dragged by

the host and consequently the charging base may be powered

Rႇ

。

7KHFKDUJLQJLQGLFDWRULVQRUPDOO\RQZKHQSRZHUHGRQDQGRႇ

when charged

。

＞

0.5m

＞

0.5m

＞

1.5m

4.Installation of side brush.

Make the left side brush (L) and the right side brush (R) correspond

to L and R on the bottom casing, press L and R and the side brushes

are installed till you hear a “cracking” sound

。