Operation Manual

Treasure Dome RFID Prototype Manual
11/15/2019
12
Step 3 Utilize Phillips screwdriver and Spanner to tighten 4 screws and nuts to the Marquee
support plate.
Step 4 Place Marquee bracket on the Marquee support plate. Utilize cable tie to tie the
cable as indicated. Utilize Socket wrench to tighten 2 nuts to Marquee bracket.
Step 5 Place Marquee base plate back and utilize screws to tighten Marquee.
Name
Cross recessed pan
head screw
SPEC
M5X10
Qty
4
Name
Flange nut
SPEC
M5
Qty
4
Name
Nut
SPEC
M5
Qty
2
Screw
Marquee base plate
Cable tie
Nut
Marquee bracket