IMPORTANT Operation Manual
Treasure Dome RFID Prototype Manual WE ARE HERE TO ASSIST For parts and service Have Questions? Contact us! UNIS SERVICE CENTER Tel: 972-241-4263 Email: service@unispartsandservice.
Treasure Dome RFID Prototype Manual CONTENT IMPORTANT SAFETY INSTRUCTIONS.......................................................................3 1. SPECIFICATIONS....................................................................................................5 2. CONTENTS OF THE ACCESSORY KIT................................................................... 6 3. PART NAME............................................................................................................7 4.
Treasure Dome RFID Prototype Manual Thank you for purchasing Ticket Dome RFID. We hope you enjoy the product. This manual contains valuable information about how to operate and maintain your game machine properly and safely. It is intended for the owner and/or personnel in charge of product operation. Carefully read and understand the instructions. If you need any help during installation and setup please utilize this manual and troubleshooting guide.
Treasure Dome RFID Prototype Manual Use the following safety guidelines to help ensure your own personal safety and to help protect your equipment and surrounding environment from potential damage. This product is an indoor game machine. Do not install outdoors. Avoid installing in the following places to prevent fire, electric shock, injury and/or machine malfunctioning: Places subject to rain/moisture, or places subject to high humidity.
Treasure Dome RFID Prototype Manual 1. SPECIFICATIONS Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz Min. Power consumption: 240W Max. Power consumption: 350W Dimension:Width: 58.66’’ (1490mm) Depth: 58.66’’ (1490mm) Height: 56.92’’(1446mm) Weight：Approximately 380.37 lb (345kg) Model No: T-351 NOTICE: After turning off the game, please wait at least 1 minute before restarting again. Note: Game specifications are subject to change without notice.
Treasure Dome RFID Prototype Manual 2. CONTENTS OF THE ACCESSORY KIT Open the package and make sure all the items are included: Following accessories No. Name Spec. Qty 1 Manual English 1 2 Key 171A 1 3 Key 171B 1 4 Power cord 1.8M 1 5 Fuse 6.3A 1 6 Micro Switch D3V-6G-1C24 3 / 4 7 Optical coupler 8 Extended line 1.2M (Maintenance and use) 1 Picture / NOTE: Part models are subject to change without notice.
3.
Treasure Dome RFID Prototype Manual 4. SET UP & INSTALLATION NOTICE We do not recommend using power tools as they may cause damage. This product is an indoor game machine. Do not install outdoors. Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid Place the unit on a dry level surface Ventilation openings in the back of the unit must not be obstructed by objects or by wall. 4.1 Transporting the Game If you need to move the game, adjust the levelers back to an “up” position.
Treasure Dome RFID Prototype Manual This procedure requires 4 people assistance. 4.2 Level Adjustment Install this game on a flat surface. If the game is installed on an unsuitable floor, it could cause game malfunction. To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it touches the floor, lifting the casters off the ground by 0.2 in. Repeat the same for all levelers. leveler NOTICE Make sure the machine is level.
Treasure Dome RFID Prototype Manual 4.3 Play Zone This machine requires space for playing and for maintenance as shown below.
Treasure Dome RFID Prototype Manual 4.4 Machine Installation Before processing, assure you have the following tools. No Name Picture 1 Phillips screwdriver 2 Socket wrench 3 Allen wrench 4 Spanner Marquee Installation Step 1 Utilize Allen wrench to loosen 8 screws to remove Marquee base plate. Screw Marquee base plate Step 2 Place Marquee support plate on the Marquee as indicated. Connect the 2 connector to Marquee.
Treasure Dome RFID Prototype Manual Step 3 Utilize Phillips screwdriver and Spanner to tighten 4 screws and nuts to the Marquee support plate. Name SPEC Qty Cross recessed pan head screw M5X10 4 Name Flange nut SPEC Qty M5 4 Step 4 Place Marquee bracket on the Marquee support plate. Utilize cable tie to tie the cable as indicated. Utilize Socket wrench to tighten 2 nuts to Marquee bracket.
Treasure Dome RFID Prototype Manual Step 6 Open the service door between Purple player and Blue player. Power on the machine. Turn the Switch to UP side. Blue player Purple player Cover bracket bracket Step 7 Utilize Phillips screwdriver to loosen 2 screws and cotter pin to remove Cover. Screws cotter pin Step 8 Place Marquee assembly on the machine as indicated. Open the Service door between Red player and Yellow player to connect the 8 port connector.
Treasure Dome RFID Prototype Manual Connector Connector Step 9 Utilize Phillips screwdriver and Spanner to tighten 4 screws, 4 flange nuts, 4 spring washers, and 4 flat washers to Marquee support bracket. Screw SPEC Qty Cross recessed pan head screw M4×16 4 Name Spring washer Name Flat washer SPEC Qty Ø4 4 SPEC Qty 4×8 4 Name Name Flange nut SPEC Qty M4 4 Step 10 The rest installation method of Marquee please refer to Step 6-Step 7 in reversed order.
Treasure Dome RFID Prototype Manual RFID Reader Installation Step 1 Open the service door between Purple player and Blue player.Turn over the RFID reader and install it on the top of the M3 board as indicated. RFID reader front side Step 2 Connect 6 cables to the RFID reader.
Treasure Dome RFID Prototype Manual 5. HOW TO PLAY 1 Please insert coin(s) /swipe card to play. 2 Aim at prizes and press Button to scoop the prizes on the turn table. 3 Prizes drop down to be collected. This will activate the BONUS feature above. 4 Press Button to stop the spinning feature and try to land on “Win BONUS” for more prizes! Note: Do not put more than 4.4lb prizes totally on the plate. Otherwise the motor will be damaged. Prizes drop down and push to win more prizes.
Treasure Dome RFID Prototype Manual 6. GAME OPTION 6.
Treasure Dome RFID Prototype Manual Item Controller Value Stepping Motor Setting 1 2 3 4 5 6 7 8 off off off off off off off on Input: Extend Input: INPUT Content INPUT J1-1 (1) 1P Coin mechanism J1-9 (9) Content INPUT Content 2P Coin 3P Coin J7-1 (1) mechanism mechanism J1-2 (2) 1P Button J1-10 (10) 2P Button J7-2 (2) 3P Button INPUT Content J7-9 (9) 4P Coin mechanism J7-10 (10) 4P Button J1-3 (3) J1-11 (11) J7-3 (3) J7-11 (11) J1-4 (4) J1-12 (12) J7-4 (4) J7-
Treasure Dome RFID Prototype Manual Input: Extend Input: INPUT J1-1 (1) J1-2 (2) J1-3 (3) J1-4 (4) J1-5 (5) J1-6 (6) J1-7 (7) J1-8 (8) Content 1P Claw depth SW 1P Scoop upper sensor 1P Scoop lower sensor 1P BONUS sensor 2P Claw depth SW 2P Scoop upper sensor 2P Scoop lower sensor 2P BONUS sensor INPUT J1-9 (9) J1-10 (10) J1-11 (11) J1-12 (12) J1-13 (13) J1-14 (14) J1-15 (15) J1-16 (16) Content 3P Claw depth SW 3P Scoop upper sensor 3P Scoop lower sensor 3P BONUS sensor 4P Claw depth SW 4P Scoop upper
Treasure Dome RFID Prototype Manual Separate port J5：(Main board 1) PROT Content Separate port J6： (Main board 1) PROT Content 5V 5V 12V 12V GND GND P10 P14 Display SCK P11 P15 Display RCK Display SI P12 RXD P16 P13 TXD P17 Separate port (Main board 2) PROT Content 5V LED display: Time LED: 12V GND P10 Light ring SCK P11 Light ring RCK P12 Light ring SI P13 Stepping motor CP 1,2,3 bit X4 Press"TEST" and "SERVICE" button Memory clear: to restart the machine to clear m
Treasure Dome RFID Prototype Manual 6.
Treasure Dome RFID Prototype Manual Switch Setting: DIP1 Content 1P Power consumption 2P Power consumption Parameters DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 1 Minimum off off off 2 on off off 3 off on off 4 on on off 5 off off on 6 on off on 7 off on on 8 Maximum on on on 1 Minimum off off off 2 on off off 3 off on off 4 on on off 5 off off on 6 on off on 7 off on on 8 Maximum on on on 1 Ticket roll OFF OFF BONUS Prize 2 Ticket roll on o
Treasure Dome RFID Prototype Manual Content Parameters DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 1 Minimum off off off 2 on off off 3 off on off 4 on on off 5 off off on 6 on off on 7 off on on 8 Maximum on on on 4P Power consumption Ticket No ticket off Ticket ON Communication: Item Content COM1 To card reader USB ADC PART: Item Separate port: Content Content Item Content Content 5V (A/D)0 (J3) IIC(J14) (A/D)1 (J4) SDA RXD SCL TXD GND GND GND PWM1 PWM2
Treasure Dome RFID Prototype Manual Item (A/D)5 (J8) (A/D)6 (J9) (A/D)7 (J10) 24 11/15/2019 Content Content
Treasure Dome RFID Prototype Manual 7. TROUBLESHOOTING 7.1 Common Problem Please confirm whether every connector connected tightly. Symptom Game will not start Power cutting Game will not coin up No sound Possible Cause Frame assembly connector is loose. Frame assembly fault Circuit protector make power SW in cutting state Coin mechanism fault or sample coin not installed. Coin mechanism signal cable loose. IO control board no signal. Volume set too low. Connector loose. PCB fault. Speaker fault.
Treasure Dome RFID Prototype Manual 9. OVERALL CONSTRUCTION 9.1 Electrical Components 1 No. Part No. Drawing No. Name Qty 1 T151-410-000 PQXS.DQ-10 Coin mechanism 4 1 No. 1 Part No. Drawing No. Name Qty T151-439-000 PQXS.DQ-39 Speaker 2 2 3 1 4 5 No. 26 11/15/2019 Part No. Drawing No. Name Qty 1 T151-444-000 PQXS.DQ-44 Filter 1 2 T151-445-000 PQXS.DQ-45 Fuse 1 3 T151-443-000 PQXS.DQ-43 Residual current circuit breaker 1 4 T151-428-000 PQXS.
Treasure Dome RFID Prototype Manual 14 15 5 16 1 2 4 7 13 8 19 12 18 11 9 22 25 10 3 21 20 23 6 26 17 24 27 27 11/15/2019
Treasure Dome RFID Prototype Manual No Part No. Drawing No. Name Qty 1 T151-401-000 PQXS.DQ-01 Main board 2 2 T151-402-000 PQXS.DQ-02 Extension board 1 3 T151-403-000 PQXS.DQ-03 PCB board 1 4 T151-405-000 PQXS.DQ-05 Light control board 1 5 T151-408-000 PQXS.DQ-08 Display 8 6 T151-409-000 PQXS.DQ-09 Fuse board 1 7 T151-429-000 PQXS.DQ-29 Fan 1 8 T151-430-000 PQXS.DQ-30 Fan net 2 9 T151-431-000 PQXS.DQ-31 Fan 2 10 T151-432-000 PQXS.
Treasure Dome RFID Prototype Manual 10 9 11 8 12 7 1 13 2 15 14 3 16 4 5 6 29 11/15/2019
Treasure Dome RFID Prototype Manual No. Part No. Drawing No. Name QTY 1 T151-407-000 PQXS.DQ-07 Light board 4 2 T151-406-000 PQXS.DQ-06 LED PCB board 4 3 T151-411-000 PQXS.DQ-11 Inside breath light 1 4 T151-412-000 PQXS.DQ-12 Outside breath light 1 5 T151-413-000 PQXS.DQ-13 Bottom breath light 1 6 T151-414-000 PQXS.DQ-14 Outside line breath light 8 7 T151-415-000 PQXS.DQ-15 Marquee breath light 1 8 T151-416-000 PQXS.DQ-16 Marquee light 1 2 9 T151-417-000 PQXS.
Treasure Dome RFID Prototype Manual 9.
Treasure Dome RFID Prototype Manual 5 9 10 6 32 11/15/2019
Treasure Dome RFID Prototype Manual No. Name QTY 1 T151-707-000 PQXS.HM-01 Speaker door decal 2 2 T151-708-000 PQXS.HM-02 Service door decal 2 3 T151-709-000 PQXS.HM-03 Coin mechanism door decal 4 T151-710-000 PQXS.HM-04 Red player decal 1 T151-711-000 PQXS.HM-05 Yellow player decal 1 T151-712-000 PQXS.HM-06 Blue player decal 1 T151-713-000 PQXS.HM-07 Purple player decal 1 T151-738-000 PQXS.HM-32 Blue decal 1 T151-739-000 PQXS.HM-33 Purple decal 1 T151-740-000 PQXS.
Treasure Dome RFID Prototype Manual No. Part No. Drawing No. T151-730-000 PQXS.HM-24 9 QTY Pusher side blue decal 1 T151-731-000 PQXS.HM-25 Pusher side purple decal 1 T151-732-000 PQXS.HM-26 1 Pusher side red decal T151-733-000 PQXS.HM-27 Pusher side yellow decal 1 T151-734-000 PQXS.HM-28 Blue LOGO decal 1 T151-735-000 PQXS.HM-29 Purple LOGO decal 1 T151-736-000 PQXS.HM-30 Red LOGO decal 1 T151-737-000 PQXS.HM-31 Yellow LOGO decal 1 11 T151-742-000 PQXS.
Treasure Dome RFID Prototype Manual 4 6 5 2 11 9 3 1 10 8 12 7 35 11/15/2019
Treasure Dome RFID Prototype Manual No. Part No. Drawing No. Name QTY 1 T151-744-000 PQXS.HM-38 Counter decal 4 2 T151-745-000 PQXS.HM-39 Ticket decal 4 3 T151-746-000 PQXS.HM-40 DBV port decal 4 4 T151-747-000 PQXS.HM-41 Service label(green) 2 5 T151-748-000 PQXS.HM-42 High voltage warning decal 1 6 T151-749-000 PQXS.HM-43 High voltage label 2 7 T151-750-000 PQXS.HM-44 Inside label 1 8 T151-751-000 PQXS.HM-45 Switch decal 1 9 T151-752-000 PQXS.
P C 10 D5 1 1 80 80 2 2 C4201-2A P C 10 D5 1 1 80 80 2 2 C4201-2A 2# TIcket drive 2#Ticket feedback J21 1 2 3 4 1# TIcket drive 5 1#Ticket feedback 6 7 8 C4201-8A 95 50N 45 25N XH-6A 1 IF NO REMARK THE WIRE SPECIFICATION, THE DEFAULT IS "AWG22 UL1007" WIRE COLOR："10" RED WIRE SPECIFICATION："K"AWG18 UL1015 REMARK:THE WIRE COLOR AND WIRE SPECIFICATION ARE ON THE TABLE REPLACED BY THE CODE,SUCH AS "10" "K" 13 1 5V 2 3 GND 4 SCK 5 RCK S 6 C0 10 70 40 20 90 50 C5 13 1 2 3 4 5 ORANGE C BLACK D GRE
C5 15 75 35 50 20 C5 15 70 40 C0 10 70 40 C5 15 75 45 25 D5 P 1 2 3 4 5 6 7 8 9 10 P 1 2 3 4 P 1 2 3 4 5 6 1 IF NO REMARK THE WIRE SPECIFICATION, THE DEFAULT IS "AWG22 UL1007" 1 2 3 4 5 7 8 9 A B 2 AWG 16 AWG 18 AWG 20 AWG 22 AWG 24 UL1015 UL1015 UL1007 UL1007 UL1007 WIRE SPECIFICATION CODE ORANGE C BROWN U BLACK D PURPLE K GREY E AQUA L PINK F SHIELD CELESTE N WIRE COLOR CODE RED BLUE YELLOW GREEN WHITE TICKET DOME 30 C P 30 10 1 1 80 2 2 C4201-2A 3 30 10 1 1 15 80 2 2 C P 20 5A Fuse
39 11/15/2019 1 IF NO REMARK THE WIRE SPECIFICATION, THE DEFAULT IS "AWG22 UL1007" WIRE COLOR："10" RED WIRE SPECIFICATION："K"AWG18 UL1015 REMARK:THE WIRE COLOR AND WIRE SPECIFICATION ARE ON THE TABLE REPLACED BY THE CODE,SUCH AS "10" "K" 1 2 3 4 5 7 8 9 A B 2 UL1015 UL1015 UL1007 UL1007 UL1007 WIRE SPECIFICATION CODE ORANGE C BROWN U AWG 16 BLACK D PURPLE K AWG 18 L AWG 20 GREY E AQUA F SHIELD AWG 22 PINK N AWG 24 CELESTE WIRE COLOR CODE RED BLUE YELLOW GREEN WHITE 80N 80N 10N 20N 30N 40N 50N
Treasure Dome RFID Prototype Manual FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
