Specifications

How to reset the pairing of the remote controller:
Press the setting button for 3 second after powering up, when the indicator blinks,
the remote controller is reset.
How to pair the remote controller with the motor:
1. Press the setting button after power-on, the indicator lights up.
2. Press the up button of the remote controller, and the indicator blinks.
3. Press the down key of the remote controller, and the indicator blinks.
4. Press the stop button of the remote controller, and the indicator blinks.
5. Press the stop key of the remote controller again, after the indicator flashes and
then goes out, and the pairing is completed.
UP
STOP
DOWN