Manual and specification of the Remote controller
Basic Specification 1. Working Voltage: DC 24V 2. Working Frequency: 433MHZ 3. Working distance: Within 20 meter 4. Working current: Standby current 10mA, working current 30mA 5. Remote controller batteries: 2*2016 lithium button batteries, superposed voltage 6V 6. Remote controller current: Standby current 0mA, working current 8mA.
UP STOP DOWN How to reset the pairing of the remote controller: Press the setting button for 3 second after powering up, when the indicator blinks, the remote controller is reset. How to pair the remote controller with the motor: 1. Press the setting button after power-on, the indicator lights up. 2. Press the up button of the remote controller, and the indicator blinks. 3. Press the down key of the remote controller, and the indicator blinks. 4.
To assure continued FCC compliance: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Overview of motor controller Overview of remote controller
