User's Manual

The Choice of Power Supply

1.Slide off the battery cover.

2.Install the batteries by matching

the correct polarity, as shown.

3.Replace the cover.

1.Battery powered mode:

6VDC 4*AA batteries

2.AC adaptor powered mode:

6V 1A

(Please use the AC adaptor which

authorized by the manufacturer!)

Right picture is the hole in for power

adaptor.

Installing and Replacing the Batteries

Replace the batteries whenever the below happens

The shows

The display dims

The display does not light up

Setting Date and Time

It is important to set the clock before using your blood pressure

monitor, so that a time stamp can be assigned to each record that

is stored in the memory. (year :2018—2058 time:12 H)

1.When the unit is off,

hold pressing “ SET ”

button for 3 seconds to

enter the mode for

year setting.

2.Press the “ MEM ”

button to change the

[YEAR].

BEFORE YOU START

In order to get the best effect and protect your monitor,please use the

the right batteries and special power adapter which complies with CE

safety standard.

CAUTION

Do not use new and used batteries together.

Do not use different types of batteries together.

Do not dispose the batteries in fire. Batteries may explode or leak.

Remove batteries if the device is not likely to be used for some time.

Worn batteries are harmful to the environment. Do not dispose with daily garbage.

The typical service life of the new and unused batteries is 180 measurements for

the operation time is 60s.

Remove the old batteries from the device following your local recycling guidelines.

START

STOP

START

STOP