User's Manual

Recall the Records

2. Press the “ MEM ” or “ SET ” button again to rotate the records.

The order of the record, date and time will be displayed alternatively.

The most recent record (1) is shown first. Each new measurement is

assigned to the first (1) record. All other records are pushed back one

digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped

from the list.

The current is the No. 1.

Twenty records in total.

The corresponding

time is A.M.9:00.

CAUTION

1.Hold pressing “ MEM ” button for 3 seconds when the monitor is under the

memory enquiry mode. The LCD will display the blinking “Use ID + dEL

ALL”.

If you did not get the correct measurement, you can delete all

results of the selected user by following steps below .

Delete the Records

DATA MANAGEMENT

The corresponding date

is July 30th.

2.Press “ MEM ” button to confirm deleting all the memories , the LCD will

display “Use ID + dEL dOnE” and the monitor will turn off.

1.When the monitor is off, please press “ MEM ” button to show the

average value of the latest three records.If the records are less than 3 groups,

it will display the latest record instead. Displays different colors at different levels

when the monitor is under the memory enquiry mode.

(Take user 1 for example.)

DATA MANAGEMENT

Bluetooth Module No.:

LS51802

Transmitting Distance:

1-10 meters

RF Frequency Range:

2.402 - 2.480 GHz

Output Power Range:

-2.36 dBm

Supply Voltage:

1.8V - 3.6V