User's Manual

MEASUREMENT
Start the Measurement
Before you start the measurement, Download the Aktiia Cuff app from APP Store or Google Play, and turn on the Bluetooth. Install the APP, and register an account.
Then set your personal information (Gender, Birthday, Height, Weight, Name and so on).
1.Switch the button to the “ON” side to turn on the monitor,and the blue light will blink.
Note: If the button is on the “OFF” side, there is no reaction when you press any button.
2. Open Aktiia cuff app on your mobile device.
3. Press on “START PAIRING” to launch the pairing procedure.
4. Once the pairing is done, the battery level information will be displayed in the screen.
5. Press on “START INITIALIZATION” to launch the measurement.
6. In case of recording stop or failure during the measurement, press on “TRY AGAIN”.
7. If the recording failed, the possible reasons of failures might be:




In this case, check your connection and try to reconnect to the Aktiia cuff. During the measurement, you should sit or stay still
and not move.
15