User's Manual

USB A connector

USB cable

USB microB connector

USB 2.0 or USB 3.0 for computers

conforming to IEC60601-1

Device

AC adapter (Not included)

(Model: BLJ06L050100U-V)

USB cable

If connecting to the AC adapter, just If connecting to a computer, just

like the following picture: like the following picture:

USB connector port

AC adaptor

Charging the power under following circumstances:

When the red light is flashing, the battery power is lower.

Note: Charge at least once every three months. If the battery

loses all its charge, it may not be rechargeable.

When powering on the monitor, the light doesn’t light up.

Power Supply and Charging

1. The battery of AKTIIA INIT I1 is built-in rechargeable li-polymer

battery, the battery current is 1000 mAh.

2. If charging for the  time (immediately after purchase or after not

having used it for a long time), or if the battery stops working while

using the device, make sure to charge it fully.

1. Connect the USB microB connector of the USB cable to the

device's USB connector port.

2. Connect the USB A connector of the USB cable to the USB

ports noted below.

BEFORE YOU START