User's Manual

Measurement Principle
General Description
Features:
Maximum 60 records
3rd technonoly: Measuring during inflation
80mm×58.5mm Digital LCD display
Indications for Use
Thank you for selecting TRANSTEK arm type blood pressure monitor
(TMB-1776-B). The monitor features blood pressure measurement, pulse rate
measurement and the result storage. The design provides you with two years
of reliable service.
Readings taken by the TMB-1776-B are equivalent to those obtained by a
trained
observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides
step by step instructions for using the product.
The Transtek Blood Pressure Monitor is digital monitors intended for use in
measuring blood pressure and heartbeat rate with arm circumference ranging
from 22cm to 42cm(about 8¾˝-16½˝).
It is intended for adult indoor use only.
Contraindications
1.The device should not be used by any person who may be suspected of,or is pregnant .
2.The device is not suitable for use on patients with implanted,electrical devices,
such as cardiac pacemakers, defibrillators.
This product uses the Oscillometric Measuring method to detect blood pressure.
Before every measurement, the unit establishes a “zero pressure” equivalent to the
atmopheric pressure. Then it starts inflating the arm cuff, meanwhile, the unit detects
pressure oscillations generated by beat-to-beat pulsatile, which is used to determine
the systolic and diastolic pressure, and also pulse rate.
2 3
INTRODUCTION INTRODUCTION
Safety Information
The signs below might be in the user manual, labeling or other component.
They are the requirement of standard and using.
Refer to instruction manual/booklet
To signify that the instruction manual/booklet must be read.
Symbol for “Manufacturer”
Symbol for “Serial Number”
Symbol for “Type BF applied part”
Symbol for “Direct Current”
The symbol indicates that the product should not be discarded
as unsorted waste but must be sent to separate collection
facilities for recovery and recycling.
Symbol for “Date and Country of manufacture”
For indoor use only
Symbol for “Class II Equipment”
SN
Symbol for “Recycle”
Caution
Indicates that caution is necessary when operating the device
or control close to where the symbol is placed, or that the
current situation needs operator awareness or operator action
in order to avoid undesirable consequences.