User's Manual

Select the User
1.
2.
3.
When the monitor is off, press and hold “ ”button to enter
user setting mode. The user ID will blink.
Then press “ ” button again, select the user ID between
user 1 and user 2.
After selecting the suitable user ID, press “ ” button to
confirm. It will display User ID+ donE” and then turn off.
1.
2.
If SUCCEED, symbol +
will be shown on the LCD.
If FAIL, only bluetooth symbol “E12”
will be shown on the LCD.
3.
Pair - up the Blood Pressure Monitor with
Your Device
Before you start pairing, please download the MedM Health app from APP Store
or Google Play in your device which supports Bluetooth 4.0 technology first.
Turn on Bluetooth and the app. Make sure both are ON when pair-up is proceeding. If
this is the first time you use “MedM Health”, please register an account first. Enter your
account and password to log in.Please enter “My Profile” to set your pernal information.
Please enter Settings infterface,click “My Devices”, select “Add the Device”.
When the monitor is OFF, press and hold the button to start pair-up.
The symbol and will display alternatively, indicating pair-up is proceeding.
After detecting the blood pressure monitor, “MedM Health” will display the product’s
information. Click and select the device which you want to bind with your mobile device.
Click “bind the device”, then click “User Profile” to select the user you want to connect
with your mobile device on the app to continute the pair-up. After binding the device, it
only can transmit the data of the bound user.
13
12
BEFORE YOU START BEFORE YOU START