User's Manual

The blood pressure monitor will proceed to data transmission after
measurement. The bluetooth symbol flashes on the LCD indicates
data is transmitting.
Segments Pressure
1 >= 0
2 >= 40
3 >= 80
4 >= 120
Segments Pressure
5 >= 140
6 >= 160
7 >= 180
8 >= 200
Notes: During inflation, the heart icon in the upper left blinks in
accordance with the user’s pulse rate.
Additionally, during inflation the progress metre to the right of
the digits builds vertically up as the pressure increases
according to the table below.
After successful transfer, the device powers off the Bluetooth
radio and the icon (and rectangle) are removed.
If the user presses and releases the On/Standby button, another
reading is initiated.
If the user presses and holds the On/Standby button for 2
seconds, the device powers down.
Or if there is no operation, after a 10 seconds of inactivity, the
device powers down.
During the measurement, if you press the On/Standby button to stop
the measurement, the numerics are cleared. It will display as below:
If you press and release the On/Standby button, another reading is
initiated.
If you press and hold the On/Standby button for 2 seconds, the
device powers down.
Or if there is no operation, after a 10 seconds of inactivity, the device
powers down.
MEASUREMENT
MEASUREMENT
1312
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All
other records are pushed back one digit (e.g., 2
becomes 3, and so on), and the oldest record (99) is
dropped from the list.
CAUTION