User's Manual

Start Measurement
When the blood pressure monitor is off, press On/Standby button to
turn it on, it will finish the whole measurement.
LCD display Adjust to zero.
Inflating and Measuring
Display and save the result.
The blood pressure monitor will proceed to data transmission after
measurement. The bluetooth symbol flashes on the LCD indicates
data is transmitting.
Segments Pressure
1 >= 0
2 >= 40
3 >= 80
4 >= 120
Segments Pressure
5 >= 140
6 >= 160
7 >= 180
8 >= 200
Notes: During inflation, the heart icon in the upper left blinks in
accordance with the user’s pulse rate.
Additionally, during inflation the progress metre to the right of
the digits builds vertically up as the pressure increases
according to the table below.
After successful transfer, the device powers off the Bluetooth
radio and the icon (and rectangle) are removed.
If the user presses and releases the On/Standby button, another
reading is initiated.
If the user presses and holds the On/Standby button for 2
seconds, the device powers down.
Or if there is no operation, after a 10 seconds of inactivity, the
device powers down.
MEASUREMENT MEASUREMENT
1110