User's Manual

The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped
from the list.
CAUTION
3. If you want to check another user’s records, press “START/STOP” button
to turn off the monitor when the blood pressure monitor is in the memory
recall mode. Press and hold “M” button to enter into the selecting user ID
mode, press “M” again to select the user ID between user 1 and user 2
press “S” button to confirm the user ID , then press “M” button to check
the selected user’s measurement records.
CAUTION
1.
2.
Interference may occur in the vicinity of equipment marked with the following
symbol . And TMB-1585-BS may interfering vicinity electrical equipment.
Sensitive people, including pregnant women pre-eclamptic and those who
implanted medical electronic instruments, should avoid using the unit whenever
possible.
Keep the monitor at least 20 centimeters away from the human body (especially
the head) when the data transmission is proceeding after measurement.
To enable the data transmission function, this product should be paired to
Bluetooth end at 2.4 GHz.
How to mitigate possible interference?
The range between the device and BT end should be reasonably close, from 1
meter to 10 meters. Please ensure no obstacles between the device and BT end
so as to obtain quality connection and to lower the RF output range.
To avoid interference, other electronic devices (particularly those with wireless
transmission / Transmitter) should be kept at least 1 meter away from the
monitor.
List of compatible devices:
For iOS devices:
The operating system must be iOS 8 or more, such as iPhone
4S, iPhone 5/5C/5S, iPhone 6/6 Plus and so on.
For Android devices:
The operating system must be 4.3 or more.
17
16
DATA MANAGEMENT
DATA MANAGEMENT
Recall the Records
1. When the monitor is off,
please press “M” button
to show the average value of
the latest three records.
(Note: If the records are less than
3 groups, the LCD will display the
recent record instead. Take user 1
for example.)
2. Press “M” button
or “S” button to get
the record you want.
The current No. is No. 1.
Ten records in total.
The corresponding
time is P.M. 9:37.
The corresponding
date is May 25 .
The order, date and time
of the record will be shown
alternately.
th