User's Manual

MEASUREMENT

BEFORE YOU START

CAUTION

Interference may occur in the vicinity of equipment marked with the following symbol .

And TMB-1583-BS may interfering vicinity electrical equipment.

Sensitive people, including pregnant women pre-eclamptic and those who implanted

medical electronic instruments, should avoid using the unit whenever possible.

Keep the monitor at least 20 centimeters away from the human body (especially the

head) when the data transmission is proceeding after measurement.

To enable the data transmission function, this product should be paired to Bluetooth end

at 2.4 GHz.

How to mitigate possible interference?

The range between the device and BT end should be reasonably close, from 1 meter to

10 meters. Please ensure no obstacles between the device and BT end so as to obtain

quality connection and to lower the RF output range.

To avoid interference, other electronic devices (particularly those with wireless

transmission / Transmitter) should be kept at least 1 meter away from the monitor.

Pair-up the Blood Pressure Monitor

with Your Device

1.Turn on Bluetooth and the app. Make sure both are ON when pair-up is proceeding.

If SUCCEED,

the symbol “ + ”

and user ID will be shown on the LCD.

If FAIL,

the symbol “ + ”

and user ID will be shown on the LCD.

3.The monitor will shut off after Pair-up process is complete.

.When the monitor is OFF, press and hold the START/STOP button to

start pair-up. The symbol “ + ”and user ID will be shown on the LCD

alternatively, indicating pair-up is proceeding.

Bluetooth Module No.: LS51802

RF Frequency Range: 2402 MHz to 2480 MHz

Output Power Range: -2.6 dBm

Supply Voltage:

2V-3.6 V

Transmitting Distance: 10 meters

List of compatible devices:

For iOS devices:

The operating system must be iOS 8 or more, such as iPhone

4S, iPhone 5/5C/5S, iPhone 6/6 Plus and so on.

For Android devices:

The operating system must be 4.3 or more.