User's Manual

11
10
BEFORE YOU START
BEFORE YOU START
4.Repeat step 2 and 3 to set the [MONTH] and [DAY].
.Repeat step 2 and 3 to set the [HOUR] and [MINUTE]. 5
6.Repeat step 2 and 3 to set the [UNIT].
7
Select the User
1.When the monitor is off , press and hold the MEM button
to enter user setting mode. The user ID will blink.
2.Then press MEM button again, select the user ID between
user 1 and user 2.
3. After selecting the suitable user ID, press SET button to confirm. The LCD
will show “ User ID+ donE ” and then turn off.
After UNIT is set,the LCD will display “donE” first, then
display all the settings you have done and then turn off.