User's Manual

17
16
3.Press the “START/STOP” button
to power off, otherwise it will turn
off within 1 minute.
If the data transmission fails,
the LCD will display “ ”.
If the data transmission succeeds,
the symbol “ ” will disappear.
2.This device will proceed
to data transmission
after measurement.
The Bluetooth symbol
blinks on the LCD
indicates data is
transmitting.
MEASUREMENT
DATA MANAGEMENT
Recall the Records
1
2. Press “MEM” button
or “SET” button to get
the record you want.
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped
from the list.
The current No. is No. 1. The corresponding
time is 9:37.
The corresponding
date is April 27th.
CAUTION
The current No., date
and time of the record
will be shown alternately.
When the monitor is off,
please press the “MEM” to
show the average value of the
latest three records.If the
records are less than three
groups,it will display the latest
record first. (Take user 1 for
example)