User's Manual

Select the User

1.When the monitor is off , press and hold the MEM button to enter user setting

mode. The user ID will blink.

2.Then press MEM button again, select the user ID between user 1 and user 2.

3. After selecting the suitable user ID, press SET button to confirm. Then the LCD

will turn off.

Pair-up the Blood Pressure Monitor

with Your Device

1.Turn on Bluetooth and the app. Make sure both are ON when pair-up is proceeding.

2.When the monitor is OFF, press and hold the START/STOP button to start pair-up.

The bluetooth symbol will blink, indicating pair-up is proceeding.

If SUCCEED, symbol

will be shown on the LCD.

If FAIL, only bluetooth symbol

will be shown on the LCD.

4.The monitor will shut off after Pair-up process is complete.

3.Then please select the user ID you want to connect with your smartphone on the app to

continute the pair-up.

Bluetooth Module No.: AW2540MV1

RF Frequency Range: 2402 MHz to 2480 MHz

Output Power Range: -1 dBm

Supply Voltage: 2V-3.6 V

Transmitting Distance: 10 meters

BEFORE YOU START BEFORE YOU START