User's Manual

Pair-up the Blood Pressure Monitor with Your
Device
1 .Turn on Bluetooth and the app. Make sure both are ON when pair-up is
proceeding.
2 .When the monitor is OFF,
press and hold START/STOP
button about 3 seconds to start
pair-up. The symbol
and the symbol will be
shown on the LCD
alternatively, indicating
pair-up is proceeding.
If SUCCEED, symbol will
be shown on the LCD.
If FAIL, symbol will be
shown on the LCD.
4 .The monitor will shut off automatically
after Pair-up process is complete.
Bluetooth Module No.: AW2540MV1
RF Frequency Range:
Output Power Range:
Supply Voltage:
Transmitting Distance: 10 meters
2402 MHz to 2480 MHz
-1 dBm
2 V to 3.6V
3.
Then please select the user ID you want to
connect with your smartphone on the app to
continute the pair-up.
11
10
BEFORE YOU START BEFORE YOU START