User's Manual

• .Slide off the battery cover.
• .Install the batteries by matching the correct polarity, as
shown below. Always use the correct battery type (2 x AAA batteries).
• .Replace the cover.
Installing and Replacing the Batteries
Remove batteries if the device is not likely to be used for some time.
The old batteries are harmful to the environment, do not dispose with other daily trash.
Remove the old batteries from the device and follow your local recycling guidelines.
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
Do not dispose of batteries in fire. Batteries may explode or leak.
Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that is
stored in the memory.
(year :2014—2054,time format:24 H/12 H)
1.
2. Press the “M” button to change
the [TIME FORMAT] between
12 hours and 24 hours.
3.
When the monitor is off, hold pressing
“S” button for about 3 seconds to set
the time format.
CAUTION
When you get the right time format,
press “S” button to confirm your
selection and it will turn to the next
step.
7
6
BEFORE YOU START BEFORE YOU START