User's Manual

Power supply
Battery powered mode:
2*AAA batteries (3V DC)
Display mode
Digital LCD V.A.35mm×46mm
Measurement mode
Oscillographic testing mode
Measurement range
Accuracy
Normal working condition
Storage & transportation
condition
Measurement perimeter
of the wrist
About 13.5cm-21.5cm
Net Weight
Approx.120g(Excluding the dry cells)
External dimensions
Attachment
Approx.64mmx90mmx57mm (Exclude the cuff)
2*AAA batteries,user manual
Mode of operation
Continuous operation
Degree of protection
Type BF applied part
Protection against
ingress of water
IPX0
Software version
Device classification
V01
Internally Powered ME Equipment
WARNING: No modification of this equipment is allowed.
This section includes a list of error messages and frequently
asked questions for problems you may encounter with your wrist
blood pressure monitor. If the products not operating as you
think it should, check here before arranging for servicing.
PROBLEM SYMPTOM CHECK THIS REMEDY
No power
Low
batteries
Error
massage
Display is dim or
will not light up.
Batteries are exhausted.
Replace with new batteries
Insert the batteries
correctly
Replace with new batteries
Batteries are inserted
incorrectly.
Show on
the display
Batteries are low.
Err 1 shows The cuff is too loose.
Refasten the cuff and then
measure again.
Err 2 shows The cuff is very tight
Refasten the cuff and then
measure again.
Err 3 shows
The pressure of the
cuff is excess.
Relax for a moment
and then measure again.
EExx,shows on
the display.
A calibration error
occurred.
Retake the measurement.
If the problem persists,
contact the retailer or our
customer service
department for further
assistance.Refer to the
warranty for contact
information and return
instructions.
Pressure:
5℃-40℃within±0.4kPa(3mmHg)
pulse value:±5%
Temperature:5℃ to 40℃
Relative humidity: ≤85%RH
Atmospheric pressure: 86kPa to 106kPa
Temperature:-20℃ to 60℃
Relative humidity: 10%RH to 93%RH
Atmospheric pressure: 50kPa to 106kPa
Rated cuff pressure:
0kPa - 40kPa (0mmHg~300mmHg)
Measurement pressure: 5.3kPa-30.7kPa
(40mmHg-230mmHg)
pulse value: (40-199) beat/minute
Data communication
is failed.
Check if the Bluetooth
function of the smartphone
is on or it is during the
range of distance
E 1 shows
23
22
SPECIFICATIONSTROUBLESHOOTING