User's Manual



1.When the monitor is off,
press the “START/STOP” button to turn
on the monitor, and it will finish the whole measurement .
Adjust to zero. LCD display
Inflating and measuring.
Display and save the results. The device will proceed to data transmission after measurement. The Bluetooth symbol blinks on the LCD indicates data is transmitting.
Start the Measurement
2.Press the “START/STOP” button
to power off, otherwise it will turn off within 1 minute.
START
STOP
START
STOP
If the data transmission fails, the Bluetooth symbol blinks all the time until it turns off.
If the data transmission succeeds, the Bluetooth symbol will disappear.
MEASUREMENT
MEASUREMENT