User's Manual



6.Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
8.After the unit is set,the LCD will display
“done” and then turn off.
7.Repeat steps 2 and 3 to set the [UNIT].
Select the User
1.When the monitor is off , press and hold the MEM button
to enter user setting mode. The user ID will blink.
2.Then press MEM button again, select the user ID between
user 1 and user 2.
3. After selecting the suitable user ID, press SET button to
confirm. Then the LCD will turn off.
BEFORE YOU START BEFORE YOU START