User's Manual



Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory. (The setting range of the year :2014—2054 time format:12H / 24H)
1.When the monitor is off,
hold pressing “SET” button for 3 seconds to enter the mode for year setting. Or when the monitor is off, press “SET” button shortly, it will display the time. Then hold pressing “SET” button to enter the mode for year setting.
2.Press the “MEM” button to
change the [YEAR].
3.When you get the right
year, press “SET” button to set down and turn to
next step.
BEFORE YOU START
4.Repeat steps 2 and 3 to set
the [MONTH] and [DAY].
5.Repeat steps 2 and 3 to set the [TIME FORMAT].
BEFORE YOU START