User's Manual



Recall the Records
1. When the monitor is off,
please press “MEM” button to show the average value of the latest three records.
2. Press “MEM” button
or “SET” button to get the record you want.
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped from the list.
The current No. is No. 4. The corresponding
time is P.M. 10:00.
The corresponding date is March 20th.
CAUTION
DOWN
UP
The date and time of the record
will be shown alternately.
If you did not get the correct measurement, you can delete all
results by following steps below.
Delete the Records
1.Hold pressing “MEM” button
for 3 seconds when the monitor is in the memory recall mode ,the flash
display will show.
2.Press “SET” button to
confirm deleting and the monitor will turn off.
3.If you don’t want to delete the
records, press “START/STOP” button to escape.
4. If there is no record.
the right display will show.
START
STOP
DATA MANAGEMENT DATA MANAGEMENT