version:1.0 User Manual Blood Pressure Monitor TMB-1490-BS Arm Type Thank you very much for selecting TRANSTEK Blood Pressure Monitor TMB-1490-BS. Guangdong Transtek Medical Electronics Co., Ltd. Zone A, No.105 ,Dongli Road, Torch Development District, 528437 Zhongshan,Guangdong,China Please do read the user manual carefully and thoroughtly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
CATALOGUE Table of Contents INTRODUCTION..................................................................................................................2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Monitor Components List BEFORE YOU START..........................................................................................................
INTRODUCTION General Description Thank you for selecting TRANSTEK arm type blood pressure monitor (TMB-1490-BS). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken by the TMB-1490-BS are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method.
INTRODUCTION INTRODUCTION CAUTION * This device is intended for indoor, home use. * This device is not intended for public use. * This device is portable, but it is not intended for use during patient transport. * This device is not suitable for continuous monitoring during medical emergencies or operations. * This device is intended for no-invasive measuring and monitoring of arterial blood pressure.
INTRODUCTION INTRODUCTION LCD display signal Monitor Components MEMORY Component list of pressure measuring system CUFF M S AIR HOSE 1 Cuff 2 Air pipe 3 PCBA 4 Pump 5 Valve START STOP TIME/DATE SYMBOL Pul/min kPa mmHg DESCRIPTION EXPLANATION Systolic blood pressure High blood pressure Diastolic blood pressure Low blood pressure Pulse display Pulse in beats per minute Deflation symbol The cuff is deflating. Memory Indicate it is in the memory mode and which group of memory it is.
BEFORE YOU START BEFORE YOU START The Choice of Power Supply Setting Date, Time and Measurement Unit 1.Battery powered mode: It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory. (The setting range of the year :2017—2057 time format:12 H/24H) 6VDC 4×AAA batteries 2.AC adaptor powered mode: 6V 1A (Please only use the recommended AC adaptor model).
BEFORE YOU START BEFORE YOU START 3.When you get the right year, press “SET” to set down and turn to next step. 5.Repeat steps 2 and 3 to set the [TIME FORMAT] between 12h and 24h. MEMORY MEMORY MEMORY M S M M S S START STOP TIME/DATE Pul/min START START STOP STOP TIME/DATE TIME/DATE Pul/min Pul/min 6.Repeat steps 2 and 3 to set the [HOUR] and [MINUTE]. 4.Repeat steps 2 and 3 to set the [MONTH] and [DAY].
BEFORE YOU START MEASUREMENT Tie the cuff 7.Repeat steps 2 and 3 to set the [UNIT]. MEMORY 1. Remove all jewelry, such as watches and bracelets from your left arm. Note: If your doctor has diagnosed you with poor circulation in your left arm, use your right arm. MEMORY M S S START START STOP TIME/DATE 2. Roll or push up your sleeve to expose the skin. Make sure your sleeve is not too tight. M Pul/min 8.
MEASUREMENT DATA MANAGEMENT Start the Measurement Before you start the measurement, download the App and turn on the Bluetooth. Install the APP, and register an account. Then set your personal information (Gender, Birthday, Height, Weight, Name and so on). 1.Please switch the User button to select the user between User A and User B. Switch to right to select User A, switch to left to select User B.
DATA MANAGEMENT DATA MANAGEMENT Delete the Records MEMORY Recall the Records 1. When the monitor is off, please press the “MEM”,it will display the latest record first when the records are less than three groups. When there are three or more than three groups ,it will display the average value of the latest three records first. 2. Press the “MEM” or “SET” to get the record you want. M If you did not get the correct measurement, you can delete all results for the selected user by following steps below.
INFORMATION FOR USER INFORMATION FOR USER Maintenance Tips for Measurement Measurements may be inaccurate if taken in the following circumstances. Within 1 hour after dinner or drinking Within 20 minutes after taking a bath In order to get the best performance, please follow the instructions below. Put in a dry place and avoid the sunshine Avoid touching water, clean it with a dry cloth in case.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure.
SPECIFICATIONS TROUBLESHOOTING This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. PROBLEM SYMPTOM No power Low batteries Display will not light up. Display is dim or show Batteries are exhausted. Replace with new batteries Batteries are inserted incorrectly.
AUTHORIZED COMPONENT Authorized Component 1.please use the TRANSTEK authorized adapter. EMC GUIDANCE EMC Guidance The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments. Warning: Don’t be near the active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation.
EMC GUIDANCE EMC GUIDANCE Table 2 Table 3 Guidance and manufacturer’s declaration – electromagnetic Immunity Immunity Test IEC 60601-1-2 Test level Electrostatic discharge (ESD) IEC 61000-4-2 ±8 kV contact ±2 kV, ±4 kV, ±8 kV, ±15 kV air ±8 kV contact ±2 kV, ±4 kV, ±8 kV, ±15 kV air Electrical fast transient/burst IEC 61000-4-4 ±2 kV for power supply lines ±1 kV signal input/output 100 kHz repetition frequency ±2 kV for power supply lines Not Applicable 100 kHz repetition frequency Surge IEC6100
FCC STATEMENT FCC Statement FCC ID:OU9TMB1490B2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
