User's Manual



DATA MANAGEMENT
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Recall the Records
2. Press the “MEM” or “SET” to get the record you
want.
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped from the list.
The current No. is No 2. The corresponding
time is P.M. 10:08.
The corresponding date is January 6th.
CAUTION
The date and time of the record
will be shown alternately.
3. If you want to look over another user’s data, switch the User button to select
the desired user. Then you can look over its historical records.
1. When the monitor is off,
please press the “MEM”,it will display the latest record first when the records are less than three groups. When there are three or more than three groups ,it will display the average value of the latest three records first.
START
STOP
43UHVVWKH³67$576723´WRSRZHU
off, otherwise it will turn off within 1 minute.
Tips: Maximum 60 records are both for User A and User B.
2.This device will proceed to data transmission after measurement. The Bluetooth symbol blinks on the LCD indicates data is transmitting.
3.If the data is successfully transmitted, the LCD will then display “dOnE”. If the data transmission fails, the LCD will display “ Err ” instead.
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
MEASUREMENT