User's Manual



BEFORE YOU START
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
6.Repeat steps 2 and 3 to set the [HOUR]
and [MINUTE].
8.After the unit is set,the LCD will display
“dOnE”first,then display all the settings you have done and then it will turn off.
7.Repeat steps 2 and 3 to set the [UNIT].
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pair-up the Blood Pressure Monitor with Your Device
1.Turn on Bluetooth and the app. Make sure both are ON when pair-up is
proceeding.
2.When the monitor is OFF, press
start pair-up. The bluetooth symbol will blink, indicating pair-up is proceeding.
If SUCCEED, symbol will be shown on the LCD.
If FAIL, only bluetooth symbol
will be shown on the LCD.
3.The monitor will shut off after Pair-up process is
complete.
Bluetooth Module No.: AW2540MV1 RF Frequency Range: 2402 MHz to 2480 MHz Output Power Range: -1 dBm Supply Voltage: 2V-3.6 V Transmitting Distance: 10 meters
and hold the START/STOP button to
BEFORE YOU START