User's Manual



Setting Date, Time and Measurement Unit
BEFORE YOU STARTBEFORE YOU START
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory. (The setting range of the year :2000—2050 time format:12 H/24H)
1.When the monitor is off,
hold pressing “SET” for 3 seconds to enter the mode for year setting.
2.Press the “MEM” to
change the [YEAR]. Each press will increase the numeral by one in a cycling manner.
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
3.When you get the right
year, press “SET” to set down and turn to next step.
4.Repeat steps 2 and 3 to set
the [MONTH] and [DAY].
5.Repeat steps 2 and 3 to set the [TIME FORMAT]
between 12h and 24h.
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP
Pul/min
MEMORY
TIME /DATE
S
M
START
STOP