User's Manual


Positioning the wrist cuff
1.Remove all accessories (watch, bracelet, etc) from your left wrist. If your
physician has diagnosed you with poor circulation in your left wrist, use your
right wrist.
2.Roll or push up your sleeve to expose the skin.
3.Apply the cuff to your left wrist with your palm facing up.
4. Position the edge of the cuff about 1-1.5cm.
5. Fasten the wrist cuff around your wrist, leaving no extra room between the cuff
and your skin. If the cuff is too loose, the measurement will not be accurate.
6.When the blood pressure monitor show
“[ ]”, it means matching successfully;
W h e n it d i s p lay” E 1 ” , it i n d i c a tes
matching unsuccessfully.
7.If matching successfully, it will show the
lately measuring record on the “receive
data” column.
8.Choose “Bloodpressure Record” to view
the history record.
9.Click “back” to return main interface of
testing software and go on testing next
blood pressure monitor.
Resting for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood
circulation to recover.
For a meaningful comparison, try to measure under similar conditions. For
example, take daily measurements at approximately the same time, on the same
wrist, or as directed by a physician.
BEFORE YOU START
MEASUREMENT