Use Instructions

38 US-EN
Carrying out the blood
pressure measurement
Place the cuff on your arm as previously described and
assume the position in which you wish to carry out the
measurement.
Switch on the blood pressure monitor using the START /
STOP button
8
.
After the full-screen display, the last measurement result saved
will be displayed. If no measurement has been saved, the de-
vice will display the value of “0”.
After 5 seconds, the blood pressure monitor will begin with
the measurement by pumping up the cuff. The measurement
is taken while the cuff is being pumped up. As soon as a pulse
has been detected, the pulse symbol
will be displayed.
After this, the cuff air pressure will be released again.
The measurement results for systolic pressure, diastolic pres-
sure and pulse will be displayed.
You can stop the measurement at any time by pressing
the START / STOP button
8
.
If the measurement has not been carried out correctly,
“Er_” will be displayed (see “Troubleshooting” also).
Repeat the measurement process in the event that this
happens.
The measurement result will be saved automatically.
If you have activated Bluetooth
®
data transfer, the data
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
®
transfer during transfer. Switch
the blood pressure monitor off by pressing the START /
STOP button once more.
6
870_silv_Blutdruckmessgeraet_Content_US.indd 38 04.07.19 09:1