Version:1.0 User Manual Blood Pressure Monitor LS808-BS Arm Type FCC ID: OU9LS808-BS2 Guangdong Transtek Medical Electronics Co., Ltd. Zone A, No.105 ,Dongli Road, Torch Development District, 528437 Zhongshan,Guangdong,China Thank you very much for selecting TRANSTEK Blood Pressure Monitor LS808-BS. Please read the user manual carefully and thoroughly so as to ensure the safe usage of this product, Keep the manual well for your further reference in case you have problems.
TABLE OF CONTENTS Table of Contents INTRODUCTION ................................................................ 2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Monitor Components List BEFORE YOU START ........................................................... 9 Power Supply and Charge Power Setting the Time,Date and Unit Pair up with Your Device Tie the Cuff MEASUREMENT ...............................................................
INTRODUCTION General Description * Thank you for selecting TRANSTEK blood pressure monitor (LS808-BS). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of lifetime. * This manual contains important safety information and caution, and provides step by step instructions for using the product. * Please do read this user manual carefully and thoroughly before use.
INTRODUCTION INTRODUCTION CAUTION * This device is intended for adult use in homes only. * The device is not suitable for use on neonatal patients, pregnant women,patients with implanted, electronical devices, patients with pre-eclampsia, premature ventricular beats, atrial fibrillation, peripheral, arterial disease and patients undergoing intravascular therapy or arterio-venous shunt or people who received a mastectomy. Please consult your doctor prior to using the unit if you suffer from illnesses.
INTRODUCTION INTRODUCTION CAUTION * Please dispose of ACCESSORIES, detachable parts, and the ME EQUIPMENT according to the local guidelines. * Manufacturer will make available on request circuit diagrams, component part lists, descriptions, calibration instructions,etc., to assist to service personnel in parts repair. * The plug/adapter plug pins insulates the device from the main supply.
BEFORE YOU START INTRODUCTION Monitor Components Power Supply and Charge Power DC POWER SOCKET ON/OFF BUTTON 1. The battery of LS808-BS is built-in rechargeable li-polymer battery, the battery current is 1000 mAh. 2. Please use the AC adaptor to charge the battery, just like the following picture: SYSTOLIC PRESSURE DIASTOLIC PRESSURE PULSE RATE QUERY/UP BUTTON AC adaptor USER 1/SET BUTTON Component list of pressure measuring system 1 PCBA 2 Air pipe 3 Pump 4 Valve 5 Cuff 3.
BEFORE YOU START CAUTION • Do not attempt to replace your blood pressure monitor’s battery. It is built-in and not changeable. • Only charge the battery in accordance with the user instructions supplied with the blood pressure monitor. • Avoid charging your blood pressure monitor in extremely high or low temperatures. • Do not use your blood pressure monitor while you are charging it. • Do not attempt to disassemble the blood pressure monitor or force open the built-in battery.
BEFORE YOU START 12 BEFORE YOU START (4) Repeat step 2 and 3 to confirm [MINUTE]. (6) Repeat step 2 and 3 to confirm the measurement unit. (5) Repeat step 2 and 3 to confirm[MONTH], [DAY] and [YEAR]. (7) After confirming the measurement unit, the LCD will display “donE” and the monitor will shut off.
BEFORE YOU START BEFORE YOU START Pair up the Blood Pressure Monitor with Your Device Tie the Cuff (1) Turn on Bluetooth and the app. Enter to the APP, then press “My Setting” ,the app will display My Setting tap. (2)Press “My devices”,the app will display My Devices tap. (3)When the moniter is off,press press“User 1” to measure, the will show and will blink after measuring,then the datas are transmitting. (4) Press in the APP to reseach,then select “808A0” to connect the monitor.
MEASUREMENT MEASUREMENT Start Measurement Inflating and measuring. Display and save the results. The data transmission will proceed. When the monitor is off, press User 1 button to turn on the monitor and it will finish the whole measurement, and then save the measure data for User 1. The same to the User 2. (Take User 1 for example.) (Note: Select the same user on your app and BPM to take the measurement, or the measurement data won’t be transmitted to the app.
DATA MANAGEMENT DATA MANAGEMENT Recall the Records (1) When the monitor is off, press “Query” button to access the memory. (4) When in the memory mode, press the User 1 button to recall the measurement history of User 1, or press the User 2 button to recall the measurement history. (2) The LCD will display the latest measuring result of the user ID which completes the last measurement. The record number, measuring date and measuring time will be displayed alternatively.
DATA MANAGEMENT DATA MANAGEMENT Delete the Records (3) The LCD will display “dEL donE” and then shut off. (1) When under the query mode, press and hold “Query” button for 3 seconds to clear the memory. (2) When the LCD display “dEL ALL”, press “Query” button to confirm. (4) If you wish to stop clearing the memory, you may press the other button, rather than “Query” button to turn off the monitor, or wait until the monitor shuts off.
INFORMATION FOR USER INFORMATION FOR USER Tips for Measurement Maintenance Measurements may be inaccurate if taken in the following circumstances. To obtain the best performance, please follow instructions below. Within 1 hour after dinner or drinking Immediate measurement after tea, coffee, smoking Put in a dry place and avoid the sunshine Avoid intense shaking and collisions.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure.
SPECIFICATIONS TROUBLESHOOTING This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. PROBLEM SYMPTOM No power Display will not light up. Low batteries Display is dim or shows E1 shows E 3 shows E 10 or E 11 shows Error message E 20 shows E 21 shows EExx,shows on the display.
FCC STATEMENT ATHORIZED COMPONENT Athorized Component Please use the TRANSTEK authorized adaptor Adaptor Type: BLJ06L060100P-U Input: 100-240V 50-60Hz,0.2Amax Output: 6V 1000mA Contact Information For more information about our products, please visit www.transtekcorp.com. you can get customer service, usual problems and customer download, transtek will serve you anytime. Manufactured by: Guangdong Transtek Medical Electronics Co., Ltd. Company: Guangdong Transtek Medical Electronics Co., Ltd.
EMC GUIDANCE EMC GUIDANCE EMC Guidance Table 2 The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments. Warning: Don’t be near the active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation.
EMC GUIDANCE Table 3 Guidance and manufacturer’s declaration - electromagnetic Immunity Radiated RF Test Band Service IEC61000-4-3 Frequency (MHz) (MHz) (Test specifications 385 380-390 TETRA for ENCLOSURE 400 PORT IMMUNITY to 450 430-470 GMRS 460, RF wireless FRS 460 communications 710 704-787 LTE Band equipment) 13, 745 17 780 810 870 930 1720 1845 1970 2450 5240 5500 5785 32 800-960 GSM 800/900, TETRA 800, iDEN 820, CDMA 850, LTE Band 5 GSM 1800; 1700CDMA 1900; 1990 GSM 1900; DECT; LTE Band 1, 3, 4,2
