User's Manual

Install the App and Pair-Up

Initial Start-UpInitial Start-Up

The measuring data will be transmitted to your device which

supports Bluetooth 4.0 technology when the pair-up is successful.

How to Wear the Pedometer

1. For first wear, use the tape measurement to measure your wrist.

2. Pull the wrist band out of the metal buckle.

3. Select the suitable length of the wrist band and cut off it .

4. Use the metal buckle to buckle up the wrist band or adjust the

band’s length.

5. For daily wear, insert the wrist band which has the USB icon into

the USB interface of the device.

6. Wear the pedometer just like wearing a watch. Remember the

wrist band which has USB icon on it must face to you.

7. Connect the other side of the band with the device.

8. Then you can start your measurement.

If SUCCEED, symbol “ Success!” will be shown on the

OLED.

If FAIL, symbol “Fail!” will be shown on the OLED.

Download and install the app in your device which supports

Bluetooth 4.0 technology.

Turn on Bluetooth and the App. Make sure both are ON when

pair-up is proceeding.

When the OLED is on, press and hold the button on the pedometer

about 6 seconds to start pair-up.

Symbol and symbol will be shown on the

OLED alternatively, indicating pair-up is

proceeding.

Success!

Fail!

CAUTION

Note: If you wear the pedometer on the left hand, the button on

the pedometer must be towards to your arm. If you wear it on the

right hand, the button on the pedometer must be towards to the

fingertip.