User's Manual

CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol . And
the Analyzer may interfere vicinity electrical equipment.
To enable the data transmission function, this product should be paired to a Bluetooth 4.0 end.
How to mitigate possible interference?
1. The range between the Analyzer and the Bluetooth end should be reasonably close, from 1
meter to 10 meters. Please ensure no obstacles between the Analyzer and the Bluetooth end
so as to obtain quality connection.
2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission
/ Transmitter) should be kept at least 1 meter away from the Analyzer.
1312
With original SENSE ON patent technology, LS208-B8 will switch on as you step on
the platform barefooted.
If it fails to identify the possible User ID, the LED will only display the weight data then
shutdown.
(To find out the solutions, please refer to Troubleshooting for more details.)
When your scale is successfully paired with your smartphone and the Bluetooth is ON,
LS208-B8 will process data transmission instead.
(Please refer to Data Transmission for more details.)
With LS208-B8 successfully pair-up with your
smartphone, the measurement data will be
transmitted to your mobile via Bluetooth.
ONLY when the measuring results are attached to a
specific User ID will it be transmitted to your mobile
after measurement.
The symbol will disappear after successful data
transmission, and you may check your personal
health data stored in your smartphone.
If the data transmission fails, the symbol will
remain. The pending measurement data will be
temporarily kept in the scale and transmitted to your
smartphone when next measurement is complete.
Successful Bluetooth
Connection
Data transmitting to
wireless wellness system:
-If SUCCEED, the symbol
disappears;
-If FAIL, the symbol
remains.
Start Measuring
Daily Measurement
Manage Your Health
Data Transmission
Stand still and keep full contact with the scale until the LED stops displaying
moving “o”.
After the weight is locked, if identify the stored weight is during this weight within+/-3 kg,
it will identify the specific user ID.
If it identifies one user, it will skip the step about user selection, then display the Weight,
Body Fat, Total Body Water, Muscle Mass, Bone Mass, Kcal and BMI data sequentially
three times and turn off.
If it identifies two or more users,for example,P1,P2 and P3, the LED will display these
users altermately two times, you may press the function key or to choose the
User ID. The measuring results will then be sorted into the User ID you selected and
displayed sequentially three times. If you don’t choose the user, it will display the weight
again and turn off.