User's Manual

General Instructions

If SUCCEED, symbol will be shown on the LCD.

If FAIL, symbol “E1” will be shown on the LCD.

Initial Start-Up

Install the App and Pair-Up

Insert the Batteries

Open the battery door in the back of the scale.

Insert the batteries (3 x 1.5V AAA) into the battery

compartment according to the polarity indications

marked inside the compartment.

* The digits “8888” will be shown on the LCD.

Close the battery door and wait until the digits

“0.0kg” are shown on the LCD.

CAUTION

When the symbol appears, the device will power off in three seconds. Then you shall replace with a

new set of batteries. Please replace all three batteries at the same time. Do NOT mix the old batteries

with the new one.

Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.

Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries

and scrapped device. Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities. Contact you local government for information regarding the collection systems

available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak

into the groundwater and get into the food chain, damaging your health and well-being.

If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries

before storing.

Transtek Body Fat Analyzer GBF-1144-B applies BIA (Bio-impedance Analysis)

technology. A small amount of weak current flows through the human body so as to detect

the bio-impedance and estimate body fat. The electrical current is small and may not be

felt.

This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also

possesses the characteristics of simple operation and abundant information.

The current mentioned above is less than 0.5mA. However, please be aware that anyone

with an wearable or implantable medical electronic instrument, such as a pacemaker, must

avoid using this device.

The intended use of this device is for healthy children 10-17 years old and healthy adults.

With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments,

which are equipped with Bluetooth function in line with BLE Technical Specifications as

well as BLP Protocol established by global organization Bluetooth SIG, are capable to

receive your personal health data.

Just simply install the specially-designed app and pair up your scale with your mobile or

portable equipments. Then you may enjoy the comprehensive health solution provided by

Transtek.

Note: It is only available for the device which supports Bluetooth 4.0 technology.

Turn on Bluetooth and the App. Make sure both are ON when pair-up is proceeding.

Press and hold “UNIT” button in the back of the scale to start pair-up.

Symbol and symbol will be shown on the LCD alternatively, indicating pair-up

is proceeding.