version:1.0 User Manual Body Fat Analyzer Contains FCC ID:OU9AW2540-LS GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China TEL:86-760-88282982 www.transtek.cn GBF-1319-B Thank you very much for selecting the Transtek Body Fat Analyzer GBF-1319-B.
Table of Contents Table of Contents Safety Information Safety and Usage Information ................................................................................................... 2 Your Scale and Its Environment ............................................................................................... 3 Efficient Use of Your Scale ...................................................................................................... 4 Overview Device Components ....................................
Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Safety Information Efficient Use of Your Scale Overview Device Components To ensure the accuracy of measurement, please follow below instructions when you start measurement. Up Button Set Button Place the scale on a flat, hard surface. Soft surface such as carpet will affect the performance of the scale. LCD Display Down Button Step onto the platform with bare feet. Stand still and keep full contact with the electrodes until the measurement is complete.
Initial Start-Up Overview LCD Display General Instructions Transtek Body Fat Analyzer GBF-1319-B applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate body fat, body water, muscle mass and CAL-MAX. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless.
Initial Start-Up Select Measurement Unit With batteries correctly installed, press “UNIT” button in the back of the scale to select measurement unit. The default measurement unit is “pound”. You may press “UNIT” button to choose among pound, kilogram, stone. Initial Start-Up Pair-Up With the advanced Bluetooth 4.
Initial Start-Up Set Up Your Profile The body fat analyzer GBF-1319-B supports multiple users (Up to Eight). You may follow below instructions to assign User ID and set up your own profile, including Gender, Goal Weight, , Stature, Age and Athletic Level. 1.Assigning User ID With batteries correctly installed, press “SET” button to enter setting when the scale is off. The system will request User ID selection first. As pictured below, “P1” blinks.
Initial Start-Up Initial Start-Up 5.Setting Age After confirming Stature, the system will divert to Age setting. As pictured below, the digits “30” blinks. The operator may press the function key or to increase or decrease the numeral. (Age Setting Range for Normal Mode: 10 to 85 years old, Age Setting Range for Athlete Mode: 15-85years old) You may press and hold the function key the numeral. or Initialising Your Scale 1. Press the platform centre and remove your foot. 2. “0.0” will be displayed.
Start Measuring Start Measuring First Measurement • Position scale on a firm flat surface. • Press SET button. • While the user number of the latest measurement is flashing, select your user number by pressing or button. After 3s, the selected number is locked, the user’s personal data will be shown once, and then the scale shows zero reading.
Start Measuring When the system finds out two or more users with similar history records, it will notify you to choose between, for example, P1 and P2. You may press key for P1 and or key for P2. The measuring results will then be sorted into the User ID you selected and displayed sequentially three times. Data Transmission Data Transmission With GBF-1319-B successfully pair-up with your iPhone, the measurement data will be transmitted to your mobile via Bluetooth.
Troubleshooting Troubleshooting Error Prompt Error When Measuring ... Description Solution Overload. The device will power off in four seconds. Stop using this scale for measurement. Low Battery. The device will power off in four seconds. Replace all three batteries at the same time. Please purchase the authorized batteries for replacement. Problem Abnormal measuring results: - Too high; OR - Too low; OR - Huge difference between two recent measurement.
Troubleshooting Problem CANNOT proceed to analyze body fat, total body water, muscle mass and CAL-MAX. The device powers off. 20 Troubleshooting Root Cause Solution Step onto the platform wearing socks or shoes. Please keep barefooted during the measurement, and keep full contact with the electrodes as well. The system cannot identify the possible User ID with most similar data. Please assign a User ID following the instruction in Set Up Your Profile.
Specifications Maintenance Specifications Product Name Body Fat Analyzer (GBF-1319-B) Scale: 300x300x23mm Dimension Net Weight Display Measurement Unit Measurement Range Division Accuracy Panel: 300x300x6mm DO use a dry soft cloth to wipe the dust. Approximately 1.85 kg DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. Digital LCD V.A.: 76x51mm DON’T wash the device with water or immerse it in water.
FCC Regulations Appendix FCC Regulations FCC User Guide Information Radio Frequency Interface Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix Appendix EMC Guidance Muscle Mass Percentage (Source: International Commission on Radiological Protection,1975) Men Women Table 1 – Guidance and MANUFACTURER ’ S declaration – ELECTROMAGNETIC EMISSIONS for all ME EQUIPMENT and ME SYSTEMS Approximately 40% of total body weight Guidance and manufacturer’s declaration – electromagnetic emissions Approximately 30% of total body weight The device is intended for use in the electromagnetic environment specified below.
Appendix Appendix Table 4 – Guidance and MANUFACTURER ’ S declaration – electromagnetic IMMUNITY – for ME EQUIPMENT and ME SYSTEMS that are not LIFE - SUPPORTING Table 2 – Guidance and MANUFACTURER ’ S declaration – electromagnetic IMMUNITY – for all ME EQUIPMENT and ME SYSTEMS Guidance and manufacturer’s declaration – electromagnetic immunity Guidance and manufacturer’s declaration – electromagnetic immunity The device is intended for use in the electromagnetic environment specified below.
Appendix Table 6 – Recommended separation distances between portable and mobile RF communications equipment and the ME EQUIPMENT or ME SYSTEM – for ME EQUIPMENT and ME SYSTEMS that are not LIFE - SUPPORTING Recommended separation distances between portable and mobile RF communications equipment and the device The device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
