Operation Manual

High Frequency Integrated RFID Reader Operation Manual Guangdong Sygole Intelligent Technology Co.,Ltd
Fig. 3.8 Demonstration of Thread Type Reader Installation in Metallic Environment
Embedded installation into metal ---- it is necessary to reserve a free area large enough.
Free area ---- it refers to the metal blank area around the reader which is embedded into metal.
1. When A is equal to 0 cm, namely: when the reader head is not reserved with a free area
during installation, the read-write distance of the reader will be severely reduced, so such
installation mode is not recommended;
2. When A is equal to 10 cm, the actually measured read-write distance of the reader is
averagely reduced by 10%; the specific data should follow the actual test in application;
In order to meet the read-write distance requirements, it is necessary to reserve a sufficient free
area in practical application (it is suggested to control A value to be not less than half of the
reader length and width);
Fig. 3.9 Demonstration of Embedded Installation into Metal
Installation of reader into metal framework ---- please avoid conductor ring.