Parts List

Ｅ

1. Hovering the aircraft around the center point.

2. Press “ + ”on the transmitter at the same time.

3. Moving and setting the aircraft surround radius range (within 2 meters-100

meters)by the Direction Joystick.

4. Press “ + ” on the transmitter at the same time again, then the

aircraft starts to fly arround according to the radius range you set in STEP 2

(Note: If the surround radius range less than 2 meters, the aircraft will fly

to 2 meters automatically) . Move the Direction Joystick to cancel the

Point of Interest mode.

NOTE: Press “ + ” on the transmitter at the same time, Point of

Interest Function” can be activated if the aircraft and transmitter

sucessfully paired and the aircraft flies up .

WAY POINT FLIGHT

— Make sure the mobile internet connected, enter in the APP, catch the

map data of the area when you intend to fly in your mobile device, then

connect your mobile device with your aircraft, you can view the map from

in the APP.

— Successfully connect the aircraft WIFI with your smart phone, click on

the App, then you can ﬁnd a RED CIRCLE(LIMITTED FLIGHT RANGE)/TAKE-

OFF POSITION/AIRCRAFT CURRENT POSITION on the map, mark the points

(16 points at most) you plan to fly within the RED CIRCLE range on the map.

If you would like to reset the points or flight route, click or .

Click ,conﬁrm to start Way Point Flight. Pushing the Right Joystick

to cancel the Way Point Flight Function.

Delete single

Send

Delete all

POINT OF INTEREST