Parts List

10
Push the joysticks into 5 & 7 o’clock position.
Motors automatically to start, push the left
joystick to take off the aircraft. (Starting the
motors before the aircraft taking off).
Starting/Stopping motors
Front
Front
2. Compass Calibration Part 2
Keeping the drone level, pick up the aircraft
from the back and rotate your body in one
full circle (360°).
— Back lights will turn to solid blue.
3. Compass Calibration Part 3
From the bottom, hold the aircraft vertically
and camera is facing to the ground, rotating
your body in one full circle(360°).
— Front lights will turn to solid white.
App aircraft status: “Compass calibration
okay”.
— Push the joysticks into the 11 & 1 o’clock
position.
Lights rapid-blinking blue (back) and white
(front).
App Drone Status: “Gyroscope is being
calibrated” “Gyroscope okay”.
NOTICE: Make sure the aircraft on a flat
surface to calibrate gyroscope.
Step 5: Reset to factory Setting/Calibrate
Gyroscope
Step 6: GPS Searching (DO NOT use GPS
Mode indoor)
Set the aircraft back down to level surface.
— Lights return to rapid-blinking blue (back)
and white (front) --This means the drone
is searching the GPS signal.
— This process can take a few minutes.
App aircraft status: “Waiting for GPS signal”.
NOTICE: Fly in open areas, tall structures and large metal structures may
affect the accuracy of the onboard compass and GPS system.
Please search the GPS signal in the open areas.