Parts List

9
SJ F PRO_XXXX
REMOTE CONTROL OPERATING METHOD
Throttle Joystick
T
u
r
n
L
e
f
t
UP
DOWN
T
u
r
n
R
i
g
h
t
FLIGHT
Step 1: Turn on the aircraft and set down on a level surface
— The aircraft will auto-trim to this level surface.
— Four aircraft arms -- Blinking Red.
— Power on the remote control and link the aircraft automatically.
— Lights flashing blue (back) and white (front).
— NOTE: You connect to the WIFI at this time to view the current drone on the
SJ F PRO App, or wait until after GPS is calibrated.
Step 2: Power on the remote control
Step 3: Connect APP
— Connect your smart phone to the WIFI of aircraft and check
the aircraft's status on the “SJ F PRO” APP.
1. Compass Calibration Part 1
— Push the joysticks into the 1 & 11 o’clock
position.
— Lights rapid-blinking Blue/red (back) and
White/red(front).
— App aircraft status: “Compass calibration”.
Step 4: Compass Calibration
Remark: The compass will be calibrated automatically when the magnetic
interference occur, it is not necessory to calibrate the compass by manually.
Direction Joystick
F
o
r
w
a
r
d
Left
Right
B
a
c
k
w
a
r
d