Users Manual

You can use 1 of 10 different “Call Tones” to get attention of other user on the same channel with same code.
● Press the CALL
key and the tone will sound, LCD will display the transmit ic
o
TX
and your call tone will be sent.
9. SCANNING CHANNELS
● Press the SCAN ke
y
once and LCD will dis
p
la
y
and radio will start scanning.
● LCD dis
p
la
y
shows the scannin
g
channel one b
y
one.
● It will sto
p
at those channels with si
g
nal for a while.
pg
10. MONITOR Function
● Press and hold the MONITOR
key to have the unit sound signal or noise, whichever occurs on the main channel.
● Release the MONITOR ke
y
to turn off the function.
The function is useful to check for activity on the main channel before you talk. When you find the main channel busy
The
function
is
useful
to
check
for
activity
on
the
main
channel
before
you
talk.
When
you
find
the
main
channel
busy
, you can change the main channel number to a clear one. Moreover, it also can be handy for the user to verify the
volume level of the radio when the radio is not receiving. You can adjust the volume, if necessary.
11. LOCK KEYS
● Press and hold
key for 3 seconds, LCD display icon.
●
All keys are locked except PTT and GROUP /OK keys
●
All
keys
are
locked
except
PTT
and
GROUP
/OK
keys
● To unlock
,
p
ress and hold
key for 3 seconds again.
12. MICROPHONE / EARPHONE JACK
The unit is equipped with a microphone / Earphone jack located at the right side. You can use an optional earphone
(not included) for handsfree function.
13 Hi h / l TX P S l ti
13
.
High
/
l
ow
TX
P
ower
S
e
l
ec
ti
on
The radio has defaut high TX power option for Channels 1 to 15. When you know your party is close by, you
can set the channels to low TX power option to conserve the energy of the radio's battery.
● When LCD shows the main screen
,
p
ress and hold the ke
y
for 3 seconds to chan
g
e the TX
p
ower o
p
tion
between High and Low.
When the radio is set to High TX power, the LCD displays the icon . When the radio is set to Low TX power,
the LCD displays the icon
Note: the channels 16 to 22 have and only have low TX power option, as per FCC regualtions.
14. Flashlight FUNCTION
To use the flashlight function
● When the flashli
g
ht is not illuminin
g,
p
ress the Flashli
g
ht ke
y
once to turn and kee
p
it on.
gg,pgy p
● When the flashli
g
ht is illuminin
g,
p
ress the Flashli
g
ht ke
y
to turn it off.
Menu Operation
Press Menu key once to firstly enter main channel selection from the main screen, press again for next function selection etc.
The menu operation flow chart is as follows.