User's Manual

the main screen.
10. CTCSSCODE FUNCTION
This function can help you select your group (3 CTCSS codes) of
users on the same channel. Only the users with the same CTCSS
code can listen and talk to each other. Please note that selecting a
CTCSS code does not assure total privacy. In radio communication,
any FRS radio can listen to all communications on the same channel
when using the default standard setting with CTCSS = 0 (OFF).
 Press the
key twice, CTCSS code display will flash.
 Press
or key to select your desired CTCSS code from
1 to 3, 0 is OFF.
 Press the PTT key to confirm and quit.
11. DUAL WATCH
The unit has dual watch function. You can monitor two channels, the
current and another (dual watch) channel. If the unit detects a signal
on either channel, it will stop and receive the signal.
 Press the
key 4 times, LCD display icon.
 Press
or key to select the dual watch channel (1-8,
except the current channel), LCD display OF is OFF.
 After turning on the function, LCD will display icon
Press the PTT key to confirm and quit or press
to continue next
function setting.
12. VOX (Hands-Free Function)
The unit has a built-in Voice Activated Circuit (VOX) function. You
can enjoy talking and listening without pressing PTT key. To have
better performance, you can use this function with the external
earphone (optional accessories).
 Press the
key 5 times, LCD display  icon and VOX
sensitivity digit will flash.
 Press
or key to select sensitivity level from “OF, 1, 2, 3”
for “OFF, Low, Medium and High respectively.
 After turning on the VOX function, LCD will display
icon.
Press PTT to confirm and quit.
Please speak close to the mic in order to activate VOX function.
13. SENDING CALL TONE
You can use 1 of 10 different “Call Tones” to get attention of other
user on the same channel.
 Press the
key and the tone will sound, LCD will display the
transmit icon
 and icon and your call tone will be sent.
14. SELECTING CALL TONE
 Press the
key 6 times, LCD display icon and call tone
number will flash.
 Press or key to select your desired call tone.
 Press the PTT key to confirm and quit or press
to continue
next function setting.
15 KEY TONE ON/OFF
The unit has the function to turn the beep tone on or off.
 Press
key 7 times, LCD display “ t o ”.
 Press
or key to turn on (LCD display ON icon) or turn
off (LCD display OF icon).
 Press PTT to confirm and quit or press to continue next
function setting.
16. ROGER BEEP
The roger beep function enables a short tone signal which is
transmitted after releasing the PTT button.
 Press
key 8 times, LCD display “ r o ”.
 Press
or key to turn on (LCD display ON icon) or turn
off (LCD display OF icon).
 Press PTT to confirm and quit or press
to continue next
function setting.