User's Manual

For each unit if you buy over 2 units, if only two units, no need to set.
After group setting finished, the display will change to " Channel 1" and "1" will keep flash.
4) You can choose new number from 0-19 as separate unit's channel number, of cause
GROUP Number can’t be choice again. Then the new number will keep flash.
5) Press any of the LOCK, TALK or GROUP button once again then the display will show new
channel number and digit number is not flash. Congratulation, you have successes set the unit's
Group Number and Channel Number.
Keep the same way for the balance unit's channel setting or Change Group Number or Channel
Number
GROUP NUMBER SETTING CHANNEL NUMBER SETTING
Keep press "-" for 5 "0" is flashing and choose any press " LOCK, TALK, or "1" is flashing and choose press " LOCK, TALK, or
seconds number from 0 to 19 GROUP any one of button any number from 0 GROUP any one button
to 19 . Group Number can not
b
once again.
same as the Channel Number. 5
Step 3 PUT THE UNIT IN DIFFERENT ROOM/PLACE
(1) (2)
(3)
(4)
(5)