User's Manual

6
ENGLISH
Mounting
Indoor Alarm Receiver
There is no requirement to mount the Indoor Alarm Receiver. As it is also completely
freestanding, you may find it more convenient to place it on a shelf or table. One of the
benefits of a battery operated wireless receiver is that if you have a large house, you can take
the receiver with you. No more missing visitors because you were all the way at the back of
the house or by the pool!
If you would like to mount the receiver, you simply
need to screw the mounting hook to a wall using
the four screws provided and then hang the Indoor
Alarm Receiver onto the hook.
Motion Sensor
1. Choose the mounting location and then mark
the screw hole location with a pencil.
2. Drill the supplied screw into the marked
location, leaving approximately ¼” of the screw
protruding from the mounting surface. You
may need to use a wall plug depending on the
surface.
3. Place the sensor’s hanger slot (see opposite)
over the screw and then shift the sensor
downwards to ensure it sits on the screw firmly.
Doorbell
The doorbell can be mounted by sticking it to a wall using the included adhesive strip(s).
1. Choose the area you want to mount the doorbell - flat, smooth surfaces are ideal.
2. Peel off the covering of the adhesive strip, and then attach the doorbell to the wall in the
location you want.
Mounting Hook
WARNING: When tting the screws into the wall, make sure you
are not inserting them anywhere near electrical wires, including
wires that may be behind the wall. If you are unsure at all, please
get a professional to check rst and install the screws for you.
!
Hanger slot